The 3-ton LH electric hoist double-girder bridge crane (hereinafter referred to as the 3-ton crane) is designed and manufactured in accordance with the standard JB/T3695-1994. The LH-type 3-ton electric hoist double-girder crane is similar to the 5-ton electric hoist in the form of CDI, MDI and other forms. When used together, it becomes a light and small crane running on rails. Its applicable lifting capacity is 3 tons, its applicable span is 7.5-35 meters, the working level is A3~A4, and the working environment temperature is within the range of -25℃ ~ +40℃. 3-ton electric hoist double-girder crane structure diagram Technical parameters of 3-ton electric hoist double-girder cranename | Model unit | LH type 3-ton hoist double-girder bridge crane (3t crane, 3t traveling crane, 3t traveling crane)
LH type 3-ton hoist bridge crane, LH type 3-ton hoist double-girder crane | Lifting weight Q | t | 3 | Control type | | Ground control, control room control | big car | Running speed V | m/min | 20 | 30 | 45 | electric motor | model | | ZDY121–4 | | power | kw | 2×0.8 | | Rotating speed | RPM | 1380 | Rise | Electric hoist | model | CD1 MD1 | Lifting height | m | 6、9、12 | Lifting speed V1 | m/min | 8 8/0.8 | car | Running speed V2 | m/min | 20 30 | job type | | A3~A5 | power supply | | 3 phase 50HZ 380V | Wheel diameter (large car/small car) | mm | φ270 /φ160 | Recommended rails | model | P18,P22,P24 | Span S | m | 10.5 | 13.5 | 16.5 | 19.5 | 22.5 | 25.5 | 28.5 | 31.5 | Maximum wheel pressure Rmax | KN | 27 | 29 | 33 | 35 | 38 | 45 | 49 | 58 | LH type 3-ton electric hoist double-girder overhead crane parameters
|